LED Matrix Rig

Just a quick thing I tossed together. This is meant to aid me in making a 8 x 40 LED matrix that will be fitted inside my Thomas Bangalter helmet from Daft Punk. It's taken almost a year ago now, but [here is a picture of it](http://doctorwoo42.deviantart.com/art/Guy-and-Thomas-Helmet-366557719). Again, old picture. It has since been coated with fiberglass resin on the outside and two coats of rondo on the inside.

But helmet aside, back to the part. The holes on all of these are about 0.16 inch diamter. I had to scale up the parts about 106% in Slicer to work (yay human error). The bending rig also has some small posts on them to ensure the plate is straight against the pins, to ensure a better bend. I would advised getting a 45 degree line on the base and plate to make sure you bend them correctly.

NOTE!
The finished matrix will be roughly 2.7"x 12.5". This is made for the dimensions of my helmet, and as such, I can't say for sure if it will work or not for other peoples helm