Thingiverse

Level 1 Rocket

di ryandgarrison

40 Download

17 Likes

0 Makes

These are parts I used on my Level 1 Certification rocket that flew on a Cesaroni H100 motor.

The nose cone is a 5:1 spherically blunted tangent ogive nose cone that fits a [T300-34](https://www.balsamachining.com/#) body tube. It prints in four pieces which can be glued together, sanded, and painted.

The tail cone doubles as a motor retainer and fits a [T38-34](https://www.balsamachining.com/#) 38 mm motor mount tube and has a notch modeled into it to allow for a rail lug to be placed at the bottom of the rocked body. There are two versions that work with a reloadable Cesaroni casing or a single use Aerotech.

aerotech motor boat tail cesaroni motor estes rocket level 1 certification level 1 rocket model rocket model rocketry model rockets nar nose cone rocket rocket ship tail cone tra aerotech motor boat tail cesaroni motor estes rocket level 1 certification level 1 rocket model rocket model rocketry model rockets nar nose cone rocket rocket ship tail cone tra aerotech motor boat tail cesaroni motor estes rocket level 1 certification level 1 rocket model rocket model rocketry model rockets nar nose cone rocket rocket ship tail cone tra

Fonte

Thingiverse

Cosa serve per stampare: Principiante Bassa affidabilità

Pezzo unico

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 0/3

Stampante

FDM / FFF

Formato file