Thingiverse
LightBox - Lasercutter
by dFactory3D
44
Downloads
34
Likes
0
Makes
This lighbox is mainly made with MDF wood of 3mm.
Also it has 3D printed components: clips, and electric house which organizes the wires and joints.
It uses 3 led bulb light of 6.5W, E14 connector type, and 6500k (cool daylight)
The diffusores are seamles fabric that are glued with hot silycone.
The cover for the light are made with cardboard and they have an inner liner of aluminium tape.
You can find the STL files for the printer parts and a DXF file to cut the wood and the cover (there are two design, round and hexagonal).
All the big frame are joint with M3 screw, and the lamp frame are glue with polyvinyl adhesive.
Component summary:
14 M3 Screws
14 M3 Nuts
14 M3 Washers
Diffusore fabric
Cardboard
2/3 m Wires
1 Switch
1 Electric plug
2 Connectors strip
3 E14 Led Light bulb
3 E14 Connectors
Also it has 3D printed components: clips, and electric house which organizes the wires and joints.
It uses 3 led bulb light of 6.5W, E14 connector type, and 6500k (cool daylight)
The diffusores are seamles fabric that are glued with hot silycone.
The cover for the light are made with cardboard and they have an inner liner of aluminium tape.
You can find the STL files for the printer parts and a DXF file to cut the wood and the cover (there are two design, round and hexagonal).
All the big frame are joint with M3 screw, and the lamp frame are glue with polyvinyl adhesive.
Component summary:
14 M3 Screws
14 M3 Nuts
14 M3 Washers
Diffusore fabric
Cardboard
2/3 m Wires
1 Switch
1 Electric plug
2 Connectors strip
3 E14 Led Light bulb
3 E14 Connectors
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
