Thingiverse

link

by antoinetaillandierstudio

105 Downloads

94 Likes

0 Makes

"link" is battens connector! You can create furniture with link!

Custom-made shelve, table, scenography!

Batten section : 27x27mm

link VIDEO : https://www.youtube.com/watch?v=7hSxW8hlWGE

3D PRINTING SETTINGS

layer height : 0.3mm
wall thickness : 1.6mm
top/bottom thickness : 1.0mm
infill density : 20%
Model available directly with anti-warping support.
Print the part in flat without support.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

27 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for link?

Any FDM printer should handle link just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 27 mm is recommended.

Does link need supports when printing?

No supports needed for link — it's designed to print clean off the bed.

What file format is link available in?

link is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is link free to download?

Yes, link is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

link

Similar Models

Add to Collection