Linus van Pelt

Linus van Pelt, from the comic strip Peanuts by Charles Schulz. Linus is the best friend of Charlie Brown and is also the younger brother of Lucy van Pelt. Though young, Linus is very intelligent and very wise, and acts as the strip's philosopher and theologian. The model is in proportion to my other Peanuts models. No supports are required. If you have the proper filament colors, no painting is needed. Don't let the number of pieces or my lengthy notes worry you, it's a reasonably quick print and very, very easy to assemble. The model is 140mm tall. Enjoy! Print instructions Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 10% Notes: See below for helpful printing and assembly tips. Building the model Colors (there are no multiple printed pieces) Black: hair eyes mouth eyebrows pants shirt_black_1 shirt_black_2 shirt_black_3 shirt_black_4 shirt_black_5 shirt_black_6 shirt_black_7 shirt_black_8 shirt_black_9 shirt_black_10 .. Beige or Flesh: head_top head_bottom arm_left arm_right legs .. Brown: shoes .. Light Blue: blanket .. Red: socks shirt_red_1 shirt_red_2 shirt_red_3 shirt_red_4 shirt_red_5 shirt_red_6 shirt_red_7 shirt_red_8 shirt_red_9 shirt_red_10 shirt_red_11 .. Any color (hidden pieces) head_pins shirt_pin Printing and assembly tips Printing tips 1-As with most of my models, no supports are required. 2-The arms are tall with a small base, so I used a brim on those two pieces. 3-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish. Assembly tips: 1-The left/right eyes and eyebrows are interchangeable. 2-The leg holes in the pants should be positioned toward the back. 3-The left/right shoe parts are not interchangeable but are easy to distinguish which is left and right. 4-The left right pieces of the sleeves of the shirt are NOT interchangeable, so take some care in placing them before gluing. 5-When putting the shirt together the holes