Lion attacking (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 1.7mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Matte White Transmission Distance: 3.7 PLA Sunlu Meta Grey Transmission Distance: 3.5 PLA Overture White Transmission Distance: 4.4 This print uses 4 unique filaments Swap Instructions: Start with Charcoal Black At layer #7 (0.64mm) swap to White At layer #8 (0.72mm) swap to Grey At layer #11 (0.96mm) swap to White for the rest.