lion

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x133.09mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA PolyLite Grey Transmission Distance: 1PLA PolyLite Black Transmission Distance: 0.3PLA Sunlu Matte White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with Blue GrayAt layer #2 (0.24mm) swap to GreyAt layer #5 (0.48mm) swap to BlackAt layer #11 (0.96mm) swap to White for the rest.