lion

Project: medium.jpgPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Orange Transmission Distance: 5PLA Sunlu Matte White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #15 (1.28mm) swap to OrangeAt layer #22 (1.84mm) swap to White for the rest.