Thingiverse
Liru
155
Download
154
Likes
4
Makes
### Printer settings:
cut up liru parts:
> for my duplicator I3 I used a .1 mm height
> scaled at 100%
> used both rafts and supports, no skirt (only use rafts on arms, body, hair/tail, head and body)
> 50mm/sec speed
> It's best to do 4 layers around and on top
> 20% infill
print liru:
> I used a .06 mm layer hight
scaled to 25% as a test print
same settings as above
###models:
cut up liru:
> an ~ 1/5 scale model (to ripped mesh)
>recommended for best quality if you plan to paint and fill seams
print liru:
> base model for cut up liru, a void filled and fully watertight liru
file scaled to ~ 1/10 scale of original liru
recommended for sla or printing with dual extrusion due to small parts
cut up liru parts:
> for my duplicator I3 I used a .1 mm height
> scaled at 100%
> used both rafts and supports, no skirt (only use rafts on arms, body, hair/tail, head and body)
> 50mm/sec speed
> It's best to do 4 layers around and on top
> 20% infill
print liru:
> I used a .06 mm layer hight
scaled to 25% as a test print
same settings as above
###models:
cut up liru:
> an ~ 1/5 scale model (to ripped mesh)
>recommended for best quality if you plan to paint and fill seams
print liru:
> base model for cut up liru, a void filled and fully watertight liru
file scaled to ~ 1/10 scale of original liru
recommended for sla or printing with dual extrusion due to small parts
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
