Thingiverse
Litho-Cube
door woodwerk
15
Downloads
8
Likes
0
Makes
A frame to hold four flat lithophane windows. Each lithophane panel/window should 75mm x 75 mm and max thickness of 3mm. I have redesigned the 'blank' rear panel to hold a USB powered LED that provides much better illumination of the box that the original design. The LEDs are available here (https://a.co/d/7STERye).
The base and top are connected with 2-56 hardware. Heat-set, threaded inserts were pressed into each leg of the top (https://www.mcmaster.com/#93365A112). After inserting panels into each of the four faces, the base was secured to the top with 2-56 flat-head machine screws.
The base and top are connected with 2-56 hardware. Heat-set, threaded inserts were pressed into each leg of the top (https://www.mcmaster.com/#93365A112). After inserting panels into each of the four faces, the base was secured to the top with 2-56 flat-head machine screws.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!