lizard hueforge

Project: lezard feuille v1.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA+ Sunlu Light Gold Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #14 (1.2mm) swap to BambuLab Green At layer #15 (1.28mm) swap to Ice Blue At layer #17 (1.44mm) swap to Light Gold At layer #22 (1.84mm) swap to Jade White for the rest. moi j ai utilise le silk light gold sunlu