Thingiverse
Load Cell Holder
von deadsy
42
Downloads
30
Likes
0
Makes
This is (yet another) holder for the 50kg load cells commonly available.
https://www.sparkfun.com/products/10245
The recess in the holder has been sized for a press-to-fit install of the load cell. Just snap it into place.
The internal space of the holder allows the inner plate to flex downwards with load: this is what you want, as it allows the strain gauges to work correctly.
You'll typically use 4 load cells to build a weight scale, along with some sort of differential amplifier and A/D conversion (E.g. HX711 chip).
The design is parameteric - and I've included the source if you wish to modify it.
Note: This is not OpenSCAD. It's a program written in Go. The main library and code examples can be found here:
https://github.com/deadsy/sdfx
About Go: https://golang.org/
https://www.sparkfun.com/products/10245
The recess in the holder has been sized for a press-to-fit install of the load cell. Just snap it into place.
The internal space of the holder allows the inner plate to flex downwards with load: this is what you want, as it allows the strain gauges to work correctly.
You'll typically use 4 load cells to build a weight scale, along with some sort of differential amplifier and A/D conversion (E.g. HX711 chip).
The design is parameteric - and I've included the source if you wish to modify it.
Note: This is not OpenSCAD. It's a program written in Go. The main library and code examples can be found here:
https://github.com/deadsy/sdfx
About Go: https://golang.org/
deadsy veröffentlicht auch auf
22 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
