Thingiverse
Lockable Cable / Drag Chain
von agparry
5
Downloads
4
Likes
0
Makes
Just something I needed recently but couldn't find.
A Lockable cable chain, with built in supports. Just push 2 sections together firmly and they are locked in a straight line, pull them apart a little and they will bend at approx 45 Deg.
Anyway, I'm still working on the details, but you are welcome to have a play round with it.
As this is the first "Thing" I've uploaded constructive feedback would be appreciated.
UPDATE :- After doing another print run with a cheapy PLA (I originally used a $45 name brand roll) I found that the spacing for some of the supports needed to be changed.
So I have added "Lock_Chain_V2b.stl" with better spacing on the supports and "Lock_Chain_V2c.stl" a shorter version which will allow for tighter curves. Also included the original .3dm files, just in case I'm not the only one that uses Rhino.
I hope these prove useful to some of you.
A Lockable cable chain, with built in supports. Just push 2 sections together firmly and they are locked in a straight line, pull them apart a little and they will bend at approx 45 Deg.
Anyway, I'm still working on the details, but you are welcome to have a play round with it.
As this is the first "Thing" I've uploaded constructive feedback would be appreciated.
UPDATE :- After doing another print run with a cheapy PLA (I originally used a $45 name brand roll) I found that the spacing for some of the supports needed to be changed.
So I have added "Lock_Chain_V2b.stl" with better spacing on the supports and "Lock_Chain_V2c.stl" a shorter version which will allow for tighter curves. Also included the original .3dm files, just in case I'm not the only one that uses Rhino.
I hope these prove useful to some of you.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!