LockJaw Model Rocket

This is a variation of my "Character Rockets" (https://www.thingiverse.com/thing:4860055) only using modified parts from the Venus Box (https://www.thingiverse.com/thing:1559232) and the Teeth for the Venus Box (https://www.thingiverse.com/thing:1564731). You will need a shock cord and Parachute for this rocket (at least 18"). You'll also need a Pringles can. I used a smaller snack pack can but this could also be made with a regular or even extended sized can (they're all the same diameter). You do NOT need a motor tube as the motor mount is integral in the 3D printed parts. I included the "Un toothed" outer jaw in case you want to build a less threatening version. This uses a Pringles "Snack Can" for a body tube but could easily be made with a regular Pringles can tube as well. The base of the nose cone forms the base of the Venus box and the box should open and close like a regular venus box. I've only flown it closed, but I suppose there's no reason it shouldn't fly open. May not go as high that way though. You will need a parachute (I used 15") and a shock cord. I also used fireproof cloth instead of the disposable wadding. You can see it fly here on a D12-3: https://www.youtube.com/watch?v=DqmDu_ES394