Lockpick handle

The picks that I used for these handles are the ones in a credit card form factor from Lock Cowboy, and where included in a kit with a training lock brought up on amazon. With these handles and some sanding on the metal edges of the picks themselves they actually make a quite descent addition to your tool collection.

Used https://www.thingiverse.com/thing:1123385 by Uncle as inspiration for this but I decided to make some modifications to the design of my own:

First off its a bit longer. 82mm in total.
The width is the same 12mm and the height is 4mm.

I also added a one perimeter edge support that you will have to remove post-print. This is because the printer don’t like printing overhangs in a circular motion. You can use either a thin saw blade or a knife to remove it. Then just insert the pick and clear the opening, and if needed, ad a drop of superglue and put together.

The cavity inside has the modelled dimensions
39.5mm depth and means that the wide metal part of my