Thingiverse
Log Cabin
von valknut
51
Downloads
41
Likes
0
Makes
Simple log cabin made from 10 different pieces. The design is made with FreeCAD. I tweaked the facade and the roof tiles a bit after my own print but they should pose no problem fitting together. In order to build this cabin you need the following amounts of each piece:
Long Beam Bottom Front Half: 1
Long Beam Bottom Back Half: 1
Long Beam: 19
Medium Beam: 5
Short Beam: 17
Long Beam Top Front: 1
Facade: 2
Roof Tiles: 12
Chimney: 1
Ridge 105mm: 2 OR if your printspace is large enough:
Ridge 210mm: 1
If you like more windows or 2 small ones instead of a large, you can exchange some long beams by short ones. That would give you two small windows with a central stanchion made out of short beams. Or if you prefer a single small window, use medium beams for the other. Anyway, feel free to create different constructions using these basic building blocks and share your makes.
Makes a great gift for a 4 year old by the way.
Long Beam Bottom Front Half: 1
Long Beam Bottom Back Half: 1
Long Beam: 19
Medium Beam: 5
Short Beam: 17
Long Beam Top Front: 1
Facade: 2
Roof Tiles: 12
Chimney: 1
Ridge 105mm: 2 OR if your printspace is large enough:
Ridge 210mm: 1
If you like more windows or 2 small ones instead of a large, you can exchange some long beams by short ones. That would give you two small windows with a central stanchion made out of short beams. Or if you prefer a single small window, use medium beams for the other. Anyway, feel free to create different constructions using these basic building blocks and share your makes.
Makes a great gift for a 4 year old by the way.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
