Thingiverse
Long Barrel for 'The Trigger' Nerf Blaster
par HighCommand
47
Téléchargements
45
Likes
0
Makes
Long/Extended Barrel attachment for 'The Trigger' Nerf/dart blaster by BoBoInnovation. This just snaps on like the original switchable front piece.
Main barrel should be printed vertically with supports, large part at the bottom. Recommend thick walls (4+) to increase durability at connection point.
The ring sight is optional, you can squeeze the bottom front of the barrel (after attaching) and the ring should slip on snugly, then release the barrel. A small piece of filament can be put into the hole in the sight.
The accent colour strip will need to be glued in.
Thanks to DeadCatAlive for doing an independent test/feedback for me.
I have some ideas for alternate versions/improvements, if you have any yourself feel free to put them in the comments.
Main barrel should be printed vertically with supports, large part at the bottom. Recommend thick walls (4+) to increase durability at connection point.
The ring sight is optional, you can squeeze the bottom front of the barrel (after attaching) and the ring should slip on snugly, then release the barrel. A small piece of filament can be put into the hole in the sight.
The accent colour strip will need to be glued in.
Thanks to DeadCatAlive for doing an independent test/feedback for me.
I have some ideas for alternate versions/improvements, if you have any yourself feel free to put them in the comments.
HighCommand publie également sur
23 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
