Luffy 5th Gear

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 155.63x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.8mm and the Actual Depth is 2.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.1 PLA BambuLab Basic Red Transmission Distance: 4.1 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 4.4 PLA BambuLab Basic Purple Transmission Distance: 1.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Gray Transmission Distance: 2.4This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #15 (1.28mm) swap to Beige At layer #18 (1.52mm) swap to Yellow At layer #21 (1.76mm) swap to Purple At layer #24 (2mm) swap to Jade White At layer #25 (2.08mm) swap to Blue GrayBorder Only Colors from here until the end. At layer #26 (2.16mm)