Mac Pro (A1289) PC conversion

This is another Mac Pro to PC conversion. But the outside looks basicly the same as the stock Mac Pro and i made all of the ports work. Ports The original io won't be needed.Glue extension cables to the empty holes. Note that the front io holes are smaller than the back io holes.The plastic piece on the case surrounding the ports doens't need to be removed.After you've made sure the extensions fit, glue them down temporarily with hot glue and glue them completely down with something like JBWeld. Glue the extensions down one-by-one. You might consider adding some more glue between the cables to make the ports extra stable. Ethernet:Get two ethernet extensions ablot 20cm long, if your motherboard doesn't have two ethernet ports, just gea a usb to ethernet adapter. To fit the ethernet ports in the Mac Pro case, you need to take the metal case around the rj45 connector off, sand the edges flat, glue the two ports together, then sand away matirial bit-by-bit untill they fit