Madara Uchiha HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x112.09mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 2.3mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Prusament Galaxy Purple Transmission Distance: 4.7PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Beige Transmission Distance: 8PLA PolyTerra Pastel Ice Transmission Distance: 1.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.76mm) swap to Galaxy PurpleAt layer #9 (0.84mm) swap to RedAt layer #11 (1mm) swap to BeigeAt layer #17 (1.48mm) swap to Pastel IceAt layer #21 (1.8mm) swap to Jade White for the rest.