Madara Uchiha

Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mmThe Model is 140.63x250.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.46mmThe Max Depth is 2.3mm and the Actual Depth is 1.9mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA Bambulab basic cyan Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 8.1 PLA PolyLite White Transmission Distance: 5 PLA BambuLab Basic BambuLab Green Transmission Distance: 2This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #8 (0.52mm) swap to Blue At layer #11 (0.7mm) swap to cyan At layer #14 (0.88mm) swap to Red At layer #15 (0.94mm) swap to Jade White At layer #18 (1.12mm) swap to cyan At layer #21 (1.3mm) swap to Orange At layer #25 (1.54mm) swap to White At layer #27 (1.66mm) swap to