Slicer Discord
Magic Key Ring Through Box – 3D printable model from MakerWorld MakerWorld
Other Hobby & DIY

Magic Key Ring Through Box

7 Downloads
6 Likes
2 Makes
Go to Model
Amaze your friends and family with this simple magic trick! In the sliding lid, I've left 3 spots for magnets so orientation of the lid is nothing to worry about. I used 10x3mm magnets and left space in the lid for them. There SHOULD be a pause in the file but if not, set one at layer 23. It'll be a bit of a tight fit but a 10x3mm magnet WILL fit. HOW TO PERFORM THE TRICK . . . . . . . . . . . . . . For this, you will need 2 key rings. One will be put on the back side of the lid so that the magnet in the middle is holding on to it and it is sticking out to where the “pen” can go through it. Of course, your spectator does not see this. You show that you have the empty box, lid not yet attached. Show the “pen” and the ring. Allow the ring and pen to be inspected if you'd like. Slide the lid onto the box with the secret ring attached to the middle magnet. Insert the pen through the box, penetrating both holes (lol). Take the ring your spectator has seen and pretend to put it in the box bu
Category
Other Hobby & DIY
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
no supports
Support-free Single piece Hardware needed
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
50 mm (Small)
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Magic Key Ring Through Box?
Any FDM printer should handle Magic Key Ring Through Box just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Magic Key Ring Through Box need supports when printing?
No supports needed for Magic Key Ring Through Box — it's designed to print clean off the bed.
What file format is Magic Key Ring Through Box available in?
Magic Key Ring Through Box is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Magic Key Ring Through Box free to download?
Yes, Magic Key Ring Through Box is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection