Slicer Discord
magic switchboard – Modelo 3D imprimible de Thingiverse Thingiverse
magic switchboard – Bild 1 magic switchboard – Bild 2 magic switchboard – Bild 3 magic switchboard – Bild 4 magic switchboard – Bild 5 magic switchboard – Bild 6

magic switchboard

por aeropic
656 Descargas
569 Likes
7 Makes
Ver Modelo
What is a "MAGIC SWITCH BOX" ? This is a fascinating magic trick with a board, a battery, 4 switches and 4 LEDs .... check on youtube! https://youtu.be/eHHGQq2YyRk

There are 4 switches and 4 LEDs, one green, one red, one yellow and one blue. The switches are connected with visible wires one to each LED. When one switch is closed, it lights up the LED that is connected to it with the same color. A basic electrical circuit,.. It can even be shown to the "victim" who, even with good electronics skills will only see a basic circuit. But then the magic happens. When you rearrange the LEDs by swapping them in their sockets, the same color switch still turns the same color LED on even though they are no more connected...

I would advice you to see directly the video then go to the "how I designed this" to get all explanations

Enjoy the magic first on yourself before reading further ;-)

Fuente
Thingiverse
Lo que necesitas para imprimir: Principiante Baja confianza
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

aeropic también publica en

5 modelos adicionales en 1 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección