Magnehelic Stand

This adjustable stand holds a Dwyer 2000-series Magnehelic allowing it to be tilted to an angle to be easily be viewed and read. When tilted to the desired angle, the Magnehelic has to be re-zeroed. When tilted and re-zeroed, by comparing its reading to that of my DIY manometer, the Magnehelic maintains its accuracy to my eye. (FYI, Dwyer's manuals say a Magnehelic should be mounted vertically). You will need the following hardware: - One #10-24 hex head bolt (3" long) to serve as the hinge pin & an associated wing nut. Tightening the wing nut will lock the desired tilt into place. - Three #6-32 machine screws (5/16" long) to mount the Magnehelic to the stand.