MAGSAFE charging cable protector

A quick to print Magsafe charging cable protector.   The model prints upright and requires no support. A brim is optional if your have adhesion issues.   3D PRINTING IMPORTANT – PRINT SETTINGS I upload a print profile for all my models. The print profile has the parts positioned for correct printing.    I strongly recommended you use my print profile. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.   I use the following settings and materials to print this model:   Infill % : 15% (no need for more) Nozzle diameter: 0.4 mm Layer height: 0.2 mm standard Material: PLA is recommended. About me   I enjoy creating 3d models that others can use and appreciate. It is a very fun pastime. I find it very rewarding to see my models downloaded and printed. I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. If you liked my model and wish to encourage me please give it a like. If you wish you can also help me with my filament costs. You can also use the discount codes listed below. You will save and I get a small commission for certain purchases. Thank you. DISCOUNT AND AFFILIATE CODES FOR PRINTER AND FILAMENT I am continuously trying to get discount codes from various manufacturers. Unlike many affiliate links these give discounts on purchases and are more difficult to obtain. In my requests I ask that they give me the codes with the most discounts for users even if it means a smaller commission.   HOW TO USE THE CODES 1.      You need to CLICK ON THE AFFILIATE LINK. The links are usually set up by countries/regions. 2.      Add the items you want to purchase 3.      Enter the DISCOUNT CODE at checkout. The codes vary by month and saving – so check back each month for the latest offers. 4.      You can only use ONE CODE so be certain to enter the one with the most disc