Makers Mashup Torture Test Cube

This can be a very difficult torture test. It includes a number of different test in it. Start at 50% size Overhang test on the bottom. Span test across the back 60mm Cube size tolerance Multiple circles tolerance Stability printing inverted cone. The print was designed so you can make it larger or smaller. This example is printed at 50%. I suggest you start out at 50% because it will print considerably faster. If you print the full size cube you do get a much better span test on the back but its harder to print the inverted pyramid on the inside. You can print this with zero infill and I was successful at 50% however its more difficult at 100%. Concentric infill is very difficult at 100% size due to lack of supports in the internal cone. Triangle infill at 1% works great and doesn't increase time significantly. Expect to have a failure or two. I would love to hear about what printers this works on and what your settings were. To date the large version 100% I have printed in as little