Makeup box

I designed this in Fusion 360 and printed it for my wife.

The mirror can be tilted in two axis and be mounted on the back while you carry the box around.

I printed all stuff in either white or pink PLA 0.2 20% infill except the Mirror-Side-Screws-And-Nuts.stl which I printed with 100% infill.

Pink filament used was https://shop.prusa3d.com/en/filament/45-pink-pla-filament-1kg.html#

White filament was https://addnorth.com/sv/shop/product/ANPL17WHI

Other stuff needed
-----------------------------------------
1x Square mirror XxX 5mm thick
40x Woodscrews 40 x M2.5x12
6x Magnets round 10x2.4

Partslist
--------------------------------------------------
- **1x Back.stl** Back wall of box
- **1x Bottom.stl** Bottom part of box
- **1x Top.stl** Top part of box
- **1x Wall.stl** Left wall of box
- **1x Wall-Right.stl** Right wall of box
- **2x Side-Holder.stl** Compartment on the outside of the walls for brushes
- **1x Top-Handle.stl** Top carry handle
- **1x Mirr