Manatee BlueHueforge 100x100

Project: ManateeBlue.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mmFilaments Used: #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #01b3ff PLA+ Sunlu Sky Blue Transmission Distance: 4 #8c9099 PLA PolyLite Grey Transmission Distance: 1 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Blue Gray At layer #12 (1.04mm) swap to Sky Blue At layer #15 (1.28mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest.