Manatee facing front Hueforge 100x100

Project: Manatee.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100.51x100mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used:#080a0d PLA PolyLite Black Transmission Distance: 0.3#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3#8c9099 PLA PolyLite Grey Transmission Distance: 1#e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #14 (1.2mm) swap to Blue GrayAt layer #18 (1.52mm) swap to GreyAt layer #21 (1.76mm) swap to White for the rest.