Maneki Neko

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 142.83x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.3PLA+ Sunlu Grey Transmission Distance: 2PLA+ Sunlu Red Transmission Distance: 6PLA+ Sunlu Orange Transmission Distance: 5PLA+ Sunlu White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GreyAt layer #9 (0.8mm) swap to RedAt layer #14 (1.2mm) swap to OrangeAt layer #16 (1.36mm) swap to White for the rest.