Marble Drop

Marble Drop - based on the retro game Kerplunk! The objective: To skillfully remove the sticks from the tower, while dropping the fewest marbles possible. The components:Plate 1 - The basePlate 2 - Panels and pins (print 2 copies)Plate 3 - Lid and 6-sided diePlates 4-9 - The sticks, marbles and die inlaysAssembly:After removing the panels and pins from the build plate, flex the hinges to loosen them…be sure to do this for both sides of each hinge.If they feel stuck, try sliding something narrow between the parts to separate them, like a palette knife. The bottom side of the print will become the inside of the tower - the panels will swing towards the inside easier than the outside.Align the hinges from one panel with the slots in the other, and use the pin to attach them together. Ensure that the tabs facing the same direction.The pins should slide freely into the hole at the bottom of the panel, through the hinges on the other panel. If there's any resistance, try sliding the pins