Mario Hueforge

Project: Mario.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA Elegoo Red Transmission Distance: 4.2 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA Overture Matte White Transmission Distance: 3.7This print uses 4 unique filamentsSwa