MakerWorld

Signs & Logos

Marvel Logo Bookmark

von 3D KAIZEN · Signs & Logos

81 Downloads

48 Likes

44 Makes

Marvel Logo Bookmark Guide for print without AMS Project: MARVEL.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x72.27mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA Overture Matte Jeans Red Transmission Distance: 0 PLA BambuLab Basic Black Transmission Distance: 0 PETG JAYO White Transmission Distance: 6This print uses 3 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Jeans Red At layer #4 (0.4mm) swap to Jeans Red At layer #12 (1.04mm) swap to Black At layer #14 (1.2mm) swap to White for the rest.

accessories ams avengers bambulab book book accessories font hero hulk ironman logo marvel marvel 2d marvel 2d art marvel art marvel arts red spiderman thor white

Kategorie

Signs & Logos

Quelle

MakerWorld

Veröffentlicht

09.07.2024

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

2 Farben

Einteilig 2 Farben / AMS

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG

Farben

2 (AMS/MMU empfohlen)

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Marvel Logo Bookmark

Ähnliche Modelle

Zur Sammlung hinzufügen