Matte Moth

Careful around the antennae when removing from plate. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Matte Dark Red Transmission Distance: 1.5PLA BambuLab Matte Mandarin Orange Transmission Distance: 3PLA+ Numakers Pure White Transmission Distance: 4.8 This print uses 5 unique filamentsSwap Instructions:Start with CharcoalAt layer #19 (0.88mm) swap to BeigeAt layer #24 (1.08mm) swap to Dark RedAt layer #28 (1.24mm) swap to Mandarin OrangeAt layer #36 (1.56mm) swap to Pure White for the rest.