Mavic 2 Pro Filter Holder

This is a re-design of the filter holder referenced to the left. That is a good design, but it was too small for the Ultimaxx filters for my Mavic 2 Pro Hasselblad camera. So, I created my own design, from scratch, using Fusion 360. I have included the f3d file which is parameter driven so you can just modify the size parameters to get a mix that fits your filter exterior dimensions, if they are different from my Ultimaxx filters.

The interior dimensions of the holder (i.e., the exterior dimensions of the filter bezel) in the STL that you will download is 31.65 x 28.43 x 2.5 mm.

I added some additional "handles" to make it easier to grip the tool while removing and attaching the filter. I also did not include the big hole in the center of the original design because it made it too easy to get a fingerprint on the filter glass. Not having that hole does mean that when you take the filter out you'll have to lift it out at the edge with your fingernail. However, it is barely held in