Mechanical Counter

A compact and fully printable mechanical counter designed for tabletop and board games. Ideal for tracking scores, turns, resources or other in-game values.    Features Fully printable, no additional hardware needed Large numbers for easy readability Tactile feedback on rotation for easy alignment and preventing accidental rotation Automatic carry to the second digit Fits within 2x2 squares on a standard 1" tabletop game grid. Highly customizable with first layer inlays. Manual filament swap friendly (provided inlays and numbers can be printed with just 2 filament swaps). Before printing Due to the compact size, the mechanism has some tight (0.1mm) clearances.  Please use a tolerance test (like the one included in Orca and derivatives) and make sure the peg fits in the 0.1mm hole (ideally with little or no force required).    Filament type Most materials should work great for this model.  Avoid any abrasive filaments (like matte, glow in the dark or fibre/metal filled) as these will wear down the counter unreasonably fast.    Printing instructions Using the included 3MF files is recommended. These have been made with OrcaSlicer and should be compatible with all OrcaSlicer forks like ElegooSlicer.  When using the multicolour version, please make sure you have multiple filaments added in your filament selection.  These files include the model and the recommended print settings. No printer/filament profiles are included so your own calibrated settings will be used.   All parts should be printed in the provided orientation Supports: none Brim: none Layer height: 0.2mm (0.1mm is also supported, other layer heights including adaptive are not) Line width: 0.4mm (0.2mm is also supported) Wall order: Outer-Inner (note: do not use Inner-Outer-Inner as that will have the wrong wall order on the outer number wheel) Only one wall on top surfaces: disabled (optional) Top surface flow ratio: 0.97-1.00 (No top surfaces will be visible once assembled, slight under extrusion is prefe