Method Development Products Wall Marker Mount

This is a two part assembly which requires no supports during printing or glue for assembly. The ASA adapter uses a 015 O-ring on the front, and a 016 O-ring Slid over the threads and up to the flat shoulder. The 016 O-Ring provides some squish/resistance to keep the marker stationary. The Socket feature uses an 18-Point Straight Spline interface which gives the maximum number of resting positions for the marker. It took a few iterations to get something worthy but here we are! Method Printing Settings:-Socket can be minimum 4 wall loops with minimum 25% endfill.-The ASA Adapter must be minimum 6 wall loops with minimum 50% endfill, The ASA Adapter sees a lot of bending moment due to the marker so care should be taken when printing this.-Method Development uses PET-C for these stands, so if you're printing with another filament, we strongly suggest testing out your printing settings and filament prior to using the stand.