Micro Zero Pi Camera

Camera to mount under a microscope and visualize the images via html on a monitor. In addition to the printed pieces you need: - 4 screws M2.5 x 25mm (or M3 if the Pi holes are enlarged) - 2 x M2 x 10mm screws - 1 screw M3 of plastic, metal type computer case or normal M3 (10mm) - 1 square nut M3 - 4 nuts M2.5 (or M3) - 2 M2 nuts - Pi camera version 5Mp with cable - Raspberry pi Zero - micro SD - Microscope To test the result you can use the code provided on the camera's website: https://picamera.readthedocs.io/en/latest/recipes2.html#rapid-capture-and-streaming