Microfluidic SLA test

This is a microfluidic test, Ideally printed in an SLA or higher resolution type printer. TPP would be ideal. But it should be within the capabilities of a SLA printer. One path is 1mm and the other one is 0.2mm. There are 3 inlets/outlets with a 1.5mm to diameter that narrows down until the actual flow path.
Hollow the object and add holes but i wouldnt rotate it since it can negativelly affect the XY resolution. You can still add supports and a raft though.
Still being tested and i am going to scale it further down once i do some pressure testing and see if the flow path can be made on a Photon Mono accurately enough. In theort those printers could make paths as narrow as 60um, 4K or higher resolution printers with high flow resin could be good for 30um.