Microphone stand

Created this mic stand to sit on the bench to suite the rode sm6 shock mount with ntk mic but will work for any shock mount or microphone with m10 thread.

i suggest u make sure your printer is calibrated right and print a m10 bolt to confirm it will print correctly https://www.thingiverse.com/thing:633534/#files

print settings i printed this at .2 resolution with %30 infill at 4000mm/min to 110mm high then printed at %100 infill at 2800mm/min till end of print this is to make sure the threaded rod at the top is strong and accurate. once finished printing i recommend cleaning the thread with a die or m10 nut to get rid of any plastic that could bind the thread.