Thingiverse
Gadgets
Ver Modelo
microscope adjustable stand
236
Descargas
223
Likes
1
Makes
This is a hight adjustable stand for a usb microscope .
The total hight with the optional rubber foot is 230mm .
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
What you need to assemble this is :
1 pcs m5 x 12mm hex cap head bolt
1 pcs m5 nut
2 pcs Ballbearing 8x16x5mm
The arm that holds the microscope has to be inserted first
in the middle of the tower ,it has to go in with one side first and
then the other can be pushed in ,insert then the lower ballbearing ,
then insert the rubber spacer plate in the back and then
insert the spindel rod ,remember the ballbearing in the top
piece before before pushing it in the tower :-) .
The rubber foot and the rubber spacer plate were made
from NinjaFlex , the rest is normal Pla .
The usb microscope you can get here :
https://www.aliexpress.com/item/
The total hight with the optional rubber foot is 230mm .
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
What you need to assemble this is :
1 pcs m5 x 12mm hex cap head bolt
1 pcs m5 nut
2 pcs Ballbearing 8x16x5mm
The arm that holds the microscope has to be inserted first
in the middle of the tower ,it has to go in with one side first and
then the other can be pushed in ,insert then the lower ballbearing ,
then insert the rubber spacer plate in the back and then
insert the spindel rod ,remember the ballbearing in the top
piece before before pushing it in the tower :-) .
The rubber foot and the rubber spacer plate were made
from NinjaFlex , the rest is normal Pla .
The usb microscope you can get here :
https://www.aliexpress.com/item/
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
