Thingiverse
Microscope Spacer
by ironchief
5
Downloads
5
Likes
0
Makes
This is a spacer for the OMAX M615INV Portable Inverted Microscope 40x-400x. ([Amazon], [MicroscopeNet])
The spacer allows tissue flasks and petri dishes to fit on the stage by increasing the distance between the light condensor and the sample stage. You can adjust the height using the OpenSCAD or the Makerbot customizer. The original height is 19mm.
---
## Parts
You can reuse the screws, washers and dowel from the original spacer or purchase additional ones with the links below.
*Washer*
- M3 Metric DIN 125 18-8 Stainless Steel Flat Washer
- [McMaster-Carr 93475A210](http://www.mcmaster.com/#93475a210)
*Screw*
- M3 6mm 18-8 Stainless Steel Metric Pan Head Phillips Machine Screw
- [McMaster-Carr 92000A116](http://www.mcmaster.com/#92000a116)
*Dowel*
- M6 22mm Metric 18-8 Stainless Steel Dowel Pin
- [McMaster-Carr 91585A161](http://www.mcmaster.com/#91585a161)
## Assembly
Loosen the screw at the base of the light source to remove it from th
The spacer allows tissue flasks and petri dishes to fit on the stage by increasing the distance between the light condensor and the sample stage. You can adjust the height using the OpenSCAD or the Makerbot customizer. The original height is 19mm.
---
## Parts
You can reuse the screws, washers and dowel from the original spacer or purchase additional ones with the links below.
*Washer*
- M3 Metric DIN 125 18-8 Stainless Steel Flat Washer
- [McMaster-Carr 93475A210](http://www.mcmaster.com/#93475a210)
*Screw*
- M3 6mm 18-8 Stainless Steel Metric Pan Head Phillips Machine Screw
- [McMaster-Carr 92000A116](http://www.mcmaster.com/#92000a116)
*Dowel*
- M6 22mm Metric 18-8 Stainless Steel Dowel Pin
- [McMaster-Carr 91585A161](http://www.mcmaster.com/#91585a161)
## Assembly
Loosen the screw at the base of the light source to remove it from th
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
