Slicer Discord
Microscope – 3D-Druckmodell von Thingiverse Thingiverse
Microscope – Bild 1 Microscope – Bild 2 Microscope – Bild 3 Microscope – Bild 4 Microscope – Bild 5 Microscope – Bild 6
Learning

Microscope

von Henrykg · Learning
67 Downloads
45 Likes
0 Makes
Zum Modell
Simple, but useful microscope. Could be perfect as a gift for children, with low magnification (5x lens, 5x and 16x eyepieces), but also for adults who want to discover micro world (up to 40x lens).

Parts list:
- microscope lens (20mm standard, for 160mm tubes) - 5x to 40x, optimal for start would be 10x
- microscope eyepiece (23.2mm standard) - 5x to 16x
- two 6mm aluminium rods or tubes
- two springs (inner diameter 6+)
- two M4 20mm with nuts
- two M4 30mm with nuts
- looong M3 threaded rod with a nut, or two M3 screws 40-50mm
- two wood screws ~3.5mm 15mm long

Elements:
- MBase - lower and upper part connected with 6mm rods
- MTable - table; when used with 5x lens you need to make light hole bigger
- MFocusScrew - yep, it's focus screw
- MTop - body tube
- MMag - body tube is shorter than standard 160mm, so you can add this element to eyepiece to make it longer and get higher magnification
- MCap - dust cover for eyepiece
- MM3connector - to connect two M3 scr
Kategorie
Learning
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Wood PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen