Mid-Power Model Rocket - Thrust Issues

DescriptionThis kit will provide all the necessary 3d printed parts to create your own D/E/F motor powered amateur rocket. The design is built around a 15" x 2" (381mm x 55mm) cardboard shipping tube which provides a strong, inexpensive, lightweight base. Parts should be printed in the orientation in the .3mf file, with supports only necessary for the tail fins. It is recommended that parts be printed in PETG at .16mm layer height with a 0.4mm nozzle. The fins should also be printed using arachne wall generation and seam generation set to back. PLA Aero can be used for the fins if you have the patience. AssemblyOnce all parts are printed, install one of the M3 eye hooks through the hole in the nose cone plug, securing with an M3 nut, and screw the plug into the nose cone until flush. It is recommended to apply CA glue to the threads once you have fit checked everything. The tail fin and motor mount assembly can be built by applying epoxy to the inside of the male portion of the