Millenium Falcon Hueforge

Project: milennium falcon.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Arctic Teal Transmission Distance: 0.5 PLA PolyLite White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #13 (1.12mm) swap to Marine Blue At layer #14 (1.2mm) swap to Sunrise Orange At layer #17 (1.44mm) swap to Arctic Teal At layer #19 (1.6mm) swap to White for the rest.