Mina

Project: KaijuNo8_Mina_.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 187.93x235mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.1mm and the Actual Depth is 3.2mmFilaments Used: PLA+ Sunlu Red Transmission Distance: 4.8 PLA+ Sunlu Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA+ Sunlu White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Red At layer #14 (1.2mm) swap to Black At layer #21 (1.76mm) swap to Blue Gray At layer #23 (1.92mm) swap to Pink At layer #25 (2.08mm) swap to Blue Gray At layer #28 (2.32mm) swap to Yellow At layer #29 (2.4mm) swap to Beige At layer #32 (2.64mm) swap to White for the rest.