Thingiverse
Mini Golf
von Occupied_Brain
52
Downloads
40
Likes
1
Makes
Designed for an indoor golf experience, this Mini Golf is safe for anyone and everyone who wants to spend some quality time playing golf indoor!
A soft smiley ball is used to make it kid and home safe!
Modified the club (not shown in the video) to save print time and material.
Golf_Club_Scotch_Brite_V3 is the new one!
What you require :
1 x Smiley ball ( or anything similar to that)
2 x 1inch or smaller suction cups
2 x 4x1mm magnets
1 x Scotch Brite Mop stick
OR
1 x 1m 22mm PVC pipe for mop
2 x 10mm M3 bolts to lock the pipe (not shown in the video)
Double sided foam tape to stick the magnets.
Stick one magnet on the flap first, then use the second magnet to check it's polarity and go ahead accordingly.
Assembly Video : https://youtu.be/XDf9agpDbLA
A soft smiley ball is used to make it kid and home safe!
Modified the club (not shown in the video) to save print time and material.
Golf_Club_Scotch_Brite_V3 is the new one!
What you require :
1 x Smiley ball ( or anything similar to that)
2 x 1inch or smaller suction cups
2 x 4x1mm magnets
1 x Scotch Brite Mop stick
OR
1 x 1m 22mm PVC pipe for mop
2 x 10mm M3 bolts to lock the pipe (not shown in the video)
Double sided foam tape to stick the magnets.
Stick one magnet on the flap first, then use the second magnet to check it's polarity and go ahead accordingly.
Assembly Video : https://youtu.be/XDf9agpDbLA
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
