Mini Inkle Loom

This is sort of like the inklette, or a lunchbox inkle loom. I put more holes for pegs and another adjustment slot in the middle, compared to the actual inklette. You don't HAVE to put a peg in every place if you don't think they'd be useful.

Print: 1 main body, 1 middle arm, one end arm, one base, and however many pegs you'd like. They should be oriented the way I prefer them to be printed - peg hole side up. That requires a lot of supports for the middle piece but it worked better than the other way, which I tried first.

The caps are not essential but they do keep the warp from sliding off, which is more needed at the top in my opinion. One or maybe two.

You really only need the base under the main body but there is a notch on the middle arm if you'd like to put a second one there.

I used 4 mm screws and nuts to connect the pieces (20mm definitely to connect the body/arm pieces, but you could use longer ones attach pegs which would probably add some reinforcement- I