Mini ITX Case with full GPU Support and flex PSU

Hello Community, i designed my first ever project in Fusion. A Mini ITX case with full GPU Support and FLEX PSU. Print Settings:15% infillmanuel Tree Support for the IO Shield i used PETG CF, i recdomend at least PETGGPU MAX 24cm Lenght!Also you will need a Power Button 16mm, i used this one: https://www.amazon.de/dp/B0F1TP3R1B?ref=ppx_yo2ov_dt_b_fed_asin_titleAnd this one for the MB Screws: M3, 5x4: https://www.amazon.de/dp/B0D17FGQWW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1The filament: amazon.de/dp/B0DJ11F3VS?ref=ppx_yo2ov_dt_b_fed_asin_title (i reccomend to dry it first for at least 8 hours) The Case and the Lid took me ages to print. The case was about 1D1h and the Lid About 8h. Maybe you guys know how to improve the model, the printtime or other things. Just let me know.I unscrewd the rear pannel of the GPU so it can fit. My Setup:Prime Asus A320Ryzen 7 5700g16 GB RAM Flex PSUAsus RX 6600, 24cm lenght Please check your mini itx motherboard for the correct alignment of the screws, a