Mini-ITX Cube

"Proof that I have too much free time"

Note: this project requires some soldering skill and a lot of filament (about 2/3 of a 1 kg roll). Avoid if you don't like to waste filament.

What I used:
- ASUS mini-ITX with 8 Gb RAM from Aliexpress (like this one: https://www.aliexpress.com/item/1005006067352352.html)
- 8" LCD display (like this one: https://www.aliexpress.com/item/4000255778759.html)
- One or two 2.5" hard disks (like this one: https://www.aliexpress.com/item/1005009717116485.html, but you can use any mechanical or SSD hard disk in the 2.5" format)
- a lot of PLA filament!

I installed Windows 10 IoT LTSC (it has official MS support until 2032 - see here what is that and how to install/upgrade: https://massgrave.dev/windows10_eol) and Windows 7 in two separate hard disks, so it can boot with any system just modifying two entries in the BIOS. Note that this board isn't a lightning running Windows 10, but it's still quite usable. Using a fast SSD with help a lot.

--------